Great Deals and Tips #2, The Portable Bench

In the last year or so I've started doing more metalwork.  I found that I needed a surface to work on that I didn't have to worry about getting scratched or beat up.  I don't have a lot of room for another table so  I got one of these at my local Wal-Mart:

I got the 29 inch tall one and my friend Billye got the 24 inch one for her studio.  It works nicely for heavy duty hammering on the bench block, and I can take it outside when I'm working on things that have to be repeatedly annealed.  I can clamp my vise on it, or clamp a bench pin on it.  When it's not in use as a jewelry workbench it's in the kitchen.  I frequently sit on it while cooking. Well, truthfully, it's in the kitchen a lot when I'm hammering on it.  The top still looks brand new even though I've worked on it a lot. It doesn't take up a lot of room.

I don't remember the price but it was around $25.00.  I tried to look it up online, but they don't have the exact one I bought.

Here I am doing a little fold forming with a copper strip.  I found out that I need a wider vise or a short piece of copper.  I could only get half the strip in the vise at a time. I'm not sure where I'm going with this strip.  I was going to put it on a brass cuff but now I'm thinking of cutting it up and making earrings. There's still a lot of texturing and folding to be done.

This was the first time I'd used my new Fretz hammer.  It's the brown handled one in the back.  It's a great hammer.

Hand Forged Earrings

Lately I'm obsessed with hammering.  I did some prototype earrings for my new "green" line.  They're green because upcycled parts are used.  In this case, the large rings started out as aluminum spacers in computer hard drives.  I textured them with my hammer. The aluminum makes the earrings ultra lightweight and easy to wear. 



They debuted at Red River Revel and sold well.  I'm going to keep making them as long as I can get the spacers. 

Next I moved on to some sterling silver wire.  These feature hand forged earwires, along with the hand forged earring drop.



I played around and made several different styles of drops as well as several styles of earwires.  Some were antiqued with liver of sulphur and some I left shiny.  These debuted at the Friends and Family show at the Calico Cat and happily sold well.




Above are some of the new forged wire earrings and findings.  The leverbacks and headpins at 1-2 o'clock are commercial.  Everything else was made by me.  These have been antiqued but not yet polished.

Here's a group of the earrings at the Friends and Family show at the Calico Cat.



These aren't hand forged but they do have some wire wrap.  I love making the wrapped donut earrings.  It's hard to find the small earring sized donuts that match, and so far the colors and type of stone I've been able to find is very limited.  The pea pod earrings were wrapped by me using a Hilltribe silver leaf as the pod.  I had to bend the leaf a little and file some notches in it to keep the wire from slipping. 



I'm working on my goals/resolutions post for 2010.  What are your goals?

It's almost time to turn on the TV and watch the ball drop.  Happy New Year everyone!

New Texturing Hammers!

I got my hands on some patterned hammers recently and have started playing with them. Each hammer has two faces with different patterns. I bought one from Beaducation and the other at a show.





I textured some copper washers that I bought from Harbor Freight. The washers don't have a huge surface area and so don't show large area of pattern, but they are inexpensive to practice on.



Right away I whacked my finger. OUCH! I was bleeding. Maybe tomorrow I will have a patterned bruise. Just kidding--sort of.



These were my favorite two patterns. The one on the left is made with the square faced pattern and the one on the right is made with the hammer face with the narrowest lines.



I couldn't get a good picture of the other patterns. After my initial experiments I worked with the wide-striped hammer some more and got a much better looking pattern with it. The circle pattern hammer makes marks kind of like water and is pretty cool.

I could tell that if I hammered for extended periods of time this would aggravate my carpal tunnel. I get much less vibration in one hand if I use a tool to hold the washer in place. (Plus my fingers are out of range of the hammer.)

Most of these pieces will end up in earrings or bracelets. I textured both sides of the washers, although one side gets flattened a little when you textured the reverse.

Next on my list of metal work is stamping words on metal and etching copper.

Shopping for hammers

I sent off another application last week and received an acceptance from one show I applied for, Azalea Trails in Tyler, TX. Now if I can get into some of the others I'm applying for I'll be happy.

Over the weekend I took a friend to Canton. If you've never heard of Canton, its a small town that turns into one huge antique/flea market on First Monday weekends. While we were there I shopped for hammers with the intention of texturing some old hammers to use for texturing metal. I bought one antique hammer that is said to be a watch maker's hammer. I like the way the twisted metal handle fits in my hand. I will polish the head, but won't texture it since it looks kind of unusual, and may be an antique. The second hammer is a more common style and probably not that old so I'll try and texture it.

I also found a cool rock I had never seen. It's a natural fiber optic stone. Notice how the writing appears to be on the surface of the stone. It's known as TV rock or ulexite.

I found some Czech glass beads, mostly rondels, that will look good mixed with gemstones.

Sunday I managed to string some pearls with silver and/or crystal. I still have to put the clasps on.

Thursday I started a "long-term" sub job in 8th grade language arts. My degree is in English, so this is right up my alley. I'm not sure how long I'll be doing it, but it could be 6 weeks or more. I just spent the better part of three hours grading papers. I'm going to have to work really hard to get jewelry done during this period.