Showing posts with label metalwork. Show all posts
Showing posts with label metalwork. Show all posts

Saturday, March 3, 2012

Finishing Up

Today was the last day of the workshop. We learned to solder a bezel, solder a back plate to the bezel, and solder the bezel onto one of the locket doors, use micro bolts, and many other things.


I got my cuff finished enough for photos, but there's still some file work and some work on the bezel that I need to do. 



locket-cuff closed


I used one of my favorite photos of my son in the locket. Stefan put Pawlie Newman under his shirt and Pawlie stuck his head out the neck opening.  They did this frequently and if Stefan had his head tilted one way, Pawlie had his head tilted the same way.  



locket-cuff open

The band has some texture on the edges and I randomly stamped some designs and some larger dimples on it.


I enjoyed  this workshop very much. Learning how to do the hinges opens up a lot of new design possibilities. 


Richard Salley and Martina Stein are tentatively planning more classes at Spring Beads.   Contact Spring Beads and get on their notification list for more information. 


Tomorrow I'll head back home.  I plan on taking a pit stop in downtown Huntsville.  There are some  great antique stores there. 



Friday, March 2, 2012

Behind Closed Doors--the Locket Cuff

Today was day two of the workshop with  Richard Salley (assisted by Martina Stein.) Click on the names for info about the workshop, including photos of the projects. 


Today we started day one of the Behind Closed Doors--the Locket-Cuff.  This was a little harder because I had to saw and solder--two things I don't do much of. I was glad to get the opportunity to learn how to do a hinge.  


I etched my metal for the locket and then cut out the frame and locket sections.  While the door section was etching I worked on a practice piece.  I had a lot of trouble and part of the tube didn't solder well.  The practice helped though because the soldering went better on the actual piece. 


Here are some photos of where I was at the end of the day.




work in progress-locket
Locket in progress



I think I did more filing than I've ever done.  When I finally got my hinges together the two doors overlapped.  I filed and filed and finally got them to meet.  There is still more filing for tomorrow.



work in progress-locket


My photo is a little small for the inside of the frame so I altered the frame so the opening is smaller than the template.  You can see my soldering was messy.  The center panel will be covered up in the finished piece, fortunately.




   work in progress-locket



Part of this class was making some small hammers and bezel pushers.  I don't have any pictures of mine because I barely got started with them.  We also learned a couple of different ways to transfer the images for etching. 


During lunch a couple of us took a little walk and visited a couple of antique stores.  




antique tea cups

This house--a bridal shop--had a lot of gingerbread and romantic touches.


bridal shop in Old Town, Spring, TX

Tomorrow we set a stone in a bezel on the locket and make and attach a cuff.





Thursday, March 1, 2012

Jewelry Workshop with Richard Salley

I'm currently taking a three-day jewelry workshop with Richard Salley in Spring, TX. I'm really having a good time and enjoying learning some new things, as well as having fun just working on jewelry all day.


Today was the first day and the class is entitled "Lasting Impressions." Here's what I did today:



works in progress


The two etched copper squares at the top are etchings I did in class to make the stamps.  I still have to rivet the handle onto the back of the head.  


The things I had the most trouble with was setting the stones in the bezel.  I'm having some difficulty getting the bezel cup to bend over the way it is supposed to.  On the plus side, I did solder those bezel cups on well because I've been using a lot of force on them and they are stuck on well. I'll go back to the bezels later. The earrings are the same length.  I don't know why one looks shorter in the photo.


The nautilus shell will probably be riveted to the swirly etched brass and will have a larger cabochon on it.  


We used PNP to transfer the designs for etching and I like it a lot.  


Here's Richard demonstrating soldering the bezel. 



soldering demo by Richard Salley


Day Two and Three will be "Behind Closed Doors--the Locket-Cuff.  We will also make some tools. 


The workshop is at Spring Beads in the Old Town part of Spring, Texas.  The neighborhood is full of quaint shops, studios, and galleries.  Plus Spring Beads is full of beads, and supplies for metalworking, enameling, etc. It's the perfect place for a jewelry workshop. 


 Here are some pictures I took while I walked down the street.



Old Town, Spring TX


The sidewalks are brick or stone.



Old Town, Spring TX


The shopping possibilities are intriguing.




Old Town, Spring TX




This building caught my attention:


Old Town, Spring TX





Here's a close-up.  Apparently you drink wine while doing art. 


The Drunk Artist sign


Sounds like fun!






Tuesday, August 23, 2011

Great New Metal Working Books--Reviews

There are a number of really fine new books out for jewelry artists.  I'll be reviewing several of these over the next few days, plus a giveaway a little later. 


I sometimes get review copies of books from publishers but the two books I'm reviewing today I purchased myself.  Both of these are great books.


First up is Kim St. Jean's Mixed Metal Mania. The subtitle is Solder, rivet, hammer, and wire exceptional jewelry.  






The book is divided into five sections.  The first section is about tools and techniques. My favorite part of this section is "Kim's Unconventional Tools," and "Kim's Tips." 


The four project sections are designed to build on the techniques learned in the previous sections. Kim states in her introduction that all the projects have been tested with students and each project is designed to teach and practice a specific skill. I think Kim's extensive experience teaching is well reflected in the projects. 


Chapter One includes techniques such as texturing, patina, cold connections, annealing and fold forming. Projects include rings, earrings, scarf pin, collar and pendants. 


Chapter Two includes the use of several different techniques in soldering, the rolling mill, forging and wire wrapping.  Projects include several pendants, including a three dimensional one, rings, a bangle, a bracelet, a chain, and two pairs of earrings. 


Chapter Three makes extensive use of propane or acetylene torches. Techniques include reticulation, soldering, riveting, pine straw casting, making a bail and bezel setting a stone.


Chapter Four has more complex projects involving foldforming, bezel setting, and other techniques.  


I especially like the foldformed projects in this book.  Kim's writing is clear and the projects and techniques are well illustrated with color photos. It's easy to see how you can take the techniques and skills learned through this book and apply them to your own unique designs.  
 ###


The second book I'm reviewing today is Karen Dougherty's Metal Style.  It's subtitled "20 jewelry designs with cold join techniques." 





The book begins with two sections on tools and techniques.  This is followed by a large section on projects.  There are 20 projects from 16 different designers. Designers include well known artists and instructors such as Robert Dancik, Thomas Mann, Janice Berkebile, Connie Fox and others.  The projects represent a broad range of style, as you would expect with a number of designers, and in addition to metal include some other materials such as resin, resin clay, faux bone, polymer clay, Lucite and several found objects. A number of the projects are complex, at least in the number of steps, but there are others with fewer steps that would be good for a student who has just learned to rivet and saw from the instructions in the front of the book. 


Some of the included projects are a riveted chain by Janice Berkebile, a hinged pendant by Dawn Bergmaier, a found object sandwich adjustable ring by Thomas Mann, and a found object necklace  by Kim St. Jean. 


Both these book are great addition to your metalworking library. 



Wednesday, June 15, 2011

Bead Table Wednesday--Fold Forming

If you look at Monday's post you'll see my review of Kim St. Jean's DVD--Metal Fold Forming.  Here's my first fold formed cuff made using her tutorial:

After LOS and a little polishing



After the first dip in the liver of sulphur the cuff came out a mauve-taupe-gray.  I stopped there.  Usually I go darker but this color matches a lot of clothes I have. I used a 3600 grit sanding sponge to hit the highlights. It will finish up in the tumbler a few more minutes for a little extra polish and hardening, then I'm coating it with ProtectaClear to keep the finish just like it is. 


The two etched brass sheets in the background are my other items on the bead table this week.  I etched them a while back, along with a third piece, then annealed them. They came out with large pink splotches from the torch. This is because the heat caused the copper in the brass to come to the surface. After a lot of elbow grease and tedious time with steel wool I got one sheet clean.  I put the others away until I had more time--and fortitude--to clean them.  


Recently I stumbled across a recipe on the net for cleaning the pink off brass. It's 3 parts white vinegar and 2 parts hydrogen peroxide. I used the grocery store versions and it worked like a charm.  No more pink and very little elbow grease! If you do this don't go off and leave your metal in the solution.  It takes just a few minutes and then you should remove the items.  I rinsed them well and put them in a baking soda wash also. It is not safe to store this in a closed container so dispose of it immediately. One report said it could explode.  Maybe they were talking about industrial strength versions but I'm not sure. 


Here's what the cuff looked like before antiquing:


Before LOS


I like the bright look as well.  This is after steel wool and 30 minutes in the tumbler.  I will probably do a couple of cuffs and keep them bright as well a some antiqued ones.


This was so much fun.  I plan to do some more fold forming.  Tonight.


Don't forget to check out the other Bead Table Wednesday photos and blog posts.




Monday, June 13, 2011

Tutorial Monday--Metal Fold Forming with Kim St. Jean

Tutorial Monday posts are reviews of tutorials by other people (not me). I haven't done one in a long time but I was so pleased with this tutorial I wanted to spread the news.


I recently purchased a DVD class called Metal Fold Forming with Kim St. Jean.  Kim was at Adorn Me this year.  I didn't get to take one of her classes, but I heard lots of good things about them.


This DVD class is produced by Beaducation.com. If you haven't been to their site you should check it out.  They also offer this tutorial in online format. 


I love this tutorial.  Kim explains things very well, and the video is up close and well produced.  It's 81 minutes long and includes a printable class handout.


The tutorial covers:
  • the creation of a cuff bracelet using fold forming
  • bonus instruction in the fabrication of a pod fold pendant
  • bonus material covering copper surface patina using the butane torch
Kim shows how to do the fold forming and several methods of texturing using the hammer and other tools.  I found that the bumpy texture that I've made previously with an antique center punch is what Kim refers to as "frog skin." It's a good name for it.

Here's a very short section of the introduction from You Tube.  There's a good picture of the cuff.





I hope to get my first cuff done in time for Bead Table Wednesday.  Check back later.



Wednesday, June 1, 2011

Bead Table Wednesday--Etching Woes

I just finished etching some copper.  I had been storing my etchant (ferric chloride) for a while and when I opened it up there was some crystalline looking debris floating on the surface of the etchant. I had never encountered that before. I stirred it up and added some fresh etchant. It looked okay.

Whatever that debris was, it floated back to the surface and partially masked the surface of the copper.  I did stir the etchant when I checked the copper during the process but that wasn't enough. 

Here's the sheet I did with text and some fish. This would have been more than one piece after I cut it up.  I think the fish will be okay--the spots look kind of like bubbles, but probably only some of the text will be usable. And it may not be usable at all.  I'll have to see what it looks like with LOS on it.  The sheets look better in person than they do in the photos, fortunately.



unexpected results when etching

 These other two pieces will probably be okay, but only because I was planning on cutting in close to the design, so the odd spots will be cut off. 

unexpected results when etching

unexpected results when etching

My husband was nice enough to strain the etchant through a coffee filter and get rid of whatever those particles were.  


These are just the first of a big batch I need to do. Hopefully the others will be contamination free. 


Check out the other Bead Table Wednesday posts:


Wednesday, May 18, 2011

Bead Table Wednesday--Forging

annealed copper and brass

There's not much on the bead table today.  I have this copper wire which I've annealed prior to texturing and shaping into cuffs and bangles.  Some of the thinner wire, which is 8 gauge, will be made into forged wire pendants if all goes to plan. The partially shaped cuff is 2 gauge. Usually I trim the ends before shaping but I was going for a particular size so I shaped first. I had wanted to work some more 2 gauge today to make larger man-sized cuffs but I seem to be out of 2 gauge.  The largest wire I can get locally is 4 gauge so I'll have to mail order some.


My son, Stefan, is interested in forging some of the bracelets.  We had planned to work on that today but didn't make it.  Hopefully tomorrow. 


The etched brass is waiting for a bath to remove the pink.  Probably it will become back pieces for pendants.   I've been playing with some of the drawer handles hardware (shown here) and am trying to figure out how to connect the pieces.  I want to frame a photo with the hardware and am thinking about soldering versus cold connections. I've never tried to rivet something so narrow but I'm probably less likely to make a mess riveting than soldering.  


Back to work!

Saturday, April 30, 2011

Yikes! What Now? Or Why I Love Some of My Mistakes

A friend gave me a bag of old jewelry a while back.  In the bag was a copper cuff that was bent out of shape.  I had some brass cuffs that I was etching and I decided to etch the copper cuff as well. 

First I tried putting it on mandrel and bending it back in shape. It didn't work so I annealed it, straightened it out and etched it.

Unfortunately I didn't have enough etchant in the container and the middle section of the bracelet made contact with the bottom of the container.  This section didn't etch well compared to the rest.  The bracelet did shape up nicely on the mandrel after the annealing though. The top of the bracelet, the part most visible, had very little etching and what it did have was very shallow.  Okay, I decided, this was not a bracelet I could sell.

Then I found a brass butterfly woman stamping.  I had previously experimented with bending this stamping with my bracelet bending pliers but hadn't done anything with it.  I decided to rivet it to the top of the cuff. 

This was tricky.  The stamping had an open back and I had to be careful not to crush it.  Also, it was difficult to rivet the wings because of the curvature of the cuff and because the rivet heads were somewhat recessed on the front of the wings.  I used my smallest hammer and a nail punch that I found at Lowes.  I balanced the cuff on the punch with the top of the rivet seated in the hollow of the punch, and very carefully tapped the rivet on the inside of the cuff. It worked. The stamping nicely covered the shallow area of the etching.

butterfly woman cuff

I would never have done this if I hadn't made a mistake with the etching.  Some of my most creative and satisfying work comes out of a mistake I've made.

I still can't sell it:  I like the cuff so well I'm keeping it for myself.

Tuesday, March 8, 2011

Day Two at Adorn Me Part A: Repousse without Pitch

Wednesday was Repousse Without Pitch, taught by Richard Salley.  I found that I really liked doing this. The tools that I made on Tuesday worked well, although I see that I need to make a few more. I did a bird in flight for my pendant.

work in progress-frontside

Instead of pitch we used a non-hardening clay.  Above is the pendant piece taped to my bench block for some more work on the outlining. The black is from annealing the metal with a torch.

work in progress-backside

Basically the design is outlined on the front, then turned over and placed on the clay where punches and other tools are used to move the metal into a relief. The backside is shown above.

work in progress-after patina


Here I've finished the repousse and have patinaed the piece.  I didn't have time to complete the pendant.  In the corners you can see where I messed up the first stamp I tried and stamped over it.  Probably I will cut all that off.  It's a little big as is anyway. I did use one commercially made stamp to do the stippling in the background, and a small liner that Bren made. All the rest of the work was done using the tools I made in the tool making class.


Repousse


Here I am doing some lining.

Repousse class


Bren is doing some lining. Bren did two pieces and colored them with the torch.  She got some amazing color on them.  I wish I had a picture of her work.

Sunday, November 21, 2010

Solder Play

I've been taking Stephanie Lee's Homesteaders 2 online class.  Here's a few pics of my works in progress.

first floodings

These are small pieces of brass that I flooded with solder.  I'm satisfied with the flooding, except for the bottom two that I used a different solder on, but my bezel making with the copper pipe isn't going so well.

first copper bezels soldered


The solder is kind of grainy looking after I heated it again to solder the bezels.  And I'm having trouble getting the bezels covered completely with solder on the outside.  I need more practice but I'm having fun with the class. I've antiqued the bezels above with Novacan patina.  It did cover the little bare copper spots. I think I'll go for a "dug up at an archeology dig" look with whatever I put in them. Until I can do better things are going to look rustic.

Thursday, November 11, 2010

30-Minute Earrings--Not Your Average Earrings!

This is one of the most inspiring jewelry making books I have ever seen. I'm so glad I purchased this book.

 While there are some beginner projects, many of the projects require metal working skills and tools that a beginner jewelry maker would not have. A beginning metalworker, versus someone who has only done basic bead stringing, could do well with these designs. There are also some designs using metal clays, rather than traditional metalwork.



Some designs call for a rolling mill to pattern metal, but the designs could be made with metal patterned in other ways, like etching or hammering. It's not necessary to have every tool mentioned.

 
I'm pretty sure that many of these would take ME longer than 30 minutes to make. I intend to put this book on my bench, practice and hone my skill on these designs until I can make them in 30 minutes. I love this book!

 The table of contents is pictorial. This makes it very easy to see what page a certain design is on and quickly turn to the instructions.

 The photos are clear and close-up. The photos are all of the finished jewelry or a detail of the finished earrings. There are some line drawings of templates. There are no step-by-step photos.

 The designs are modern and unique. Just leafing through the book gave me inspiration for many different designs. Several of the designs gave me ideas on ways to improve some of my own designs, even though I use different techniques with my designs.


This book is good for those wanting to take their skills to a new level, and for those seeking inspiration with their own designs.




Tuesday, November 9, 2010

Homesteaders 1 & 2 and Book Giveaway

During the summer I had the pleasure of taking Homesteaders' Metalsmithing,  an online  course by Stephanie Lee.  One of the major things I learned was soldering with a torch.  I had some reservations before the course began about whether the online format was a good one for learning to solder, but my fears were completely unfounded.  The class was fantastic!  It's a combination of blog posts, pdf's, videos, and a wonderfully energetic and supportive yahoo group email list.  I learned a lot but didn't get as much done as I'd hoped (I was getting ready for Red River Revel and got sidetracked making jewelry for it.) 

I signed up for Homesteader's 2, which started this week. New material is being introduced in this session, although much of the material is a repeat. The class runs five weeks instead of four. The material is available on-line for several months so the videos and other material will be available for review. One of the new subjects is use of a rolling mill. I gifted myself with an economy model rolling mill after Red River Revel so I'm looking forward to this part. Hopefully I'll get a lot more practice this time around as well as learn some new things.


I ran out to Sears today and got a stand for the bench grinder. We didn't have a place in the garage to mount it and now we do! And it wasn't expensive or hard to put together. Plus, plus! During the last class I did all the filing on the little brass squares and rectangles by hand and it took way too long.


I finished some components but not soldered pieces in the last class.  My friend, Bren, sent me some pictures to use. Didn't she do a great job?  Bren and Julie and I met at Adorn Me! last year and all three of us took Stephanie's online class.



The photo above is Elvis Presley as a child.


Bren used a napkin ring and a clip on earring in this pendant.


This pendant utilizes a skeleton key and scrapbook paper.


This is a dried daisy in an antique bezel, with resin.




A handmade bezel with a photo behind resin, and a screw back earring.


Bren cleverly used some hardware trim on this one.


Check out Julie's blog HERE and look at her work. 

Now for the giveaway.  Homesteader's 1 included a copy of Stephanie's great book, Semiprecious Salvage.  Reading the book is like taking a class.  I love the story format she uses, and the multitude of close up photos.



I already had a copy of Stephanie's book so now I have two.  You can win one of them by commenting on this post.  If you post it to Facebook or tweet it you can get another chance. Tell me about it in separate comments.  Just be sure I have a way to get hold of you, either through an email linked to your profile or leave me your email address. You can spell it out:  "name at suchandsuch dot whatever" instead of using the symbols.  The deadline for comments is noon CST on Monday, November 15th.  Due to the incessant spamming comments by people promoting links to  "adult" sites I've turned comment moderation on.  I'll be out of town on some day trips this week, so don't get stressed if your comment doesn't doesn't get approved right away.  I'll get to it! 

Friday, August 6, 2010

Back to Etching

I'm working on jewelry for Red River Revel.  This is the biggest show I do every year. Last night and today I've been working on etching some copper and brass. 

etched copper plate in the pickle

Here's an etched copper plate.  I annealed it this afternoon and put it in a pickle of vinegar and salt.  The black stuff is bits of black fire scale coming off the back of the plate.  I annealed it face down so the back had the most scale.  It's almost finished in the pickle.  Next I rinse it, bath it in some baking soda water, rinse again, and clean it with 4 0 steel wool. Then it will be ready to cut with my disk cutter and I can dap it (dome it). After that I'll cut holes, antique it (or not), tumble it, and coat it with a permanent jewelry finish.  I like the finish I choose to be trouble free for the customer so I almost always coat my copper. After that it will be assembled into jewelry.

I made a list one time of the steps I go through from beginning to end in the etching-to-jewelry process and there are 15 steps.  Eight of the steps, maybe more, have multiple steps. Sometimes I skip some steps if I'm doing something different.  It isn't always necessary to pickle items after annealing them.  The fire scale can be attractive in some applications.

I love etched script and I found some wonderful script stamps at the Heirloom Productions rubber stamp show in Grapevine Texas last month.  I also got some really cool stamps at one of my favorite vendors,  Lost Coast Designs. I'm going to be using them soon.

One of my new projects is etched light switch plates.  I have some copper and brass switch plates and will be experimenting with them.

Tuesday, October 27, 2009

Bras for the Cause!

The Calico Cat, and The Blue Armadillo Winery recently hosted a Bras for the Cause event. 

I had a plan in mind and ordered the supplies while I was at the Revel.  Then we all got the H1N1 flu, and the supplies still hadn't arrived.  The supplies arrived just in the nick of time, I started feeling better and went to work on the design.  I used heavy aluminum wire shaped into large spirals and textured it with my hammer.  I think it came out with a kind of futuristic science fiction/fantasy chic look.  What do you think?

my art bra

I used some vintage clip earrings, chain, aluminum wire, and a purchased bra.

Here are some pics from the event.  The red bra, "Butterflies are Free" was made by my friend Billye.


butterflies are free

bras for the cause event

There were some really interesting bras.  Click on the Bras for the Cause link above to see pics of all the bras.  I know hubby was thinking that I was dragging him to a boring event but he had a good time and commented about the humorous aspect of many of the entries.

The event was a huge success! Over 60 bras were entered.  Attendees voted on their favorites.  Each vote cost a dollar and over $3000 dollars was raised for the Hunt Regional Healthcare Cancer Rehabilitation facility. 

I like to give some of the income from my jewelry shows to charity and our vote money came from proceeds from my shows. 

Tuesday, September 8, 2009

Learning New Techniques-- Hammered Copper Bangles

I purchased several gauges of copper electrical wire at hardware stores and I just made my first cuffs and bangles using the wire. I used an article by Kim St. Jean in summer preview 2009 issue of Step by Step Wire Jewelry for instructions (Bodacious Copper Bangles).

I used 8, 6, and 4 gauge wires.

I cut the wires into various lengths for cuffs and bangles. The bangles are all extra large size. This is so I'll be able to wear them. I very rarely find a commercial bangle big enough to go over my hand.

The next step was annealing the copper. I had never done this before. I was worried about dropping the hot wire on my foot when I quenched it so I dug my Doc Martens out of the closet. Probably I should have worn pants too, but it was about a 100 degrees outside. I did have eye protection and gloves.

annealing copper wire

I enlisted my teen-aged son, Stefan, to take pictures. The sun was so bright that Ralph had to hold a piece of cardboard up to shade the work so I could see the orange glow. I used a fire brick that Ralph made a while back, after he figured out how much the shipping was on the bricks. Ralph kept saying things like, "I hope my brick doesn't explode." The brick was dry as a bone so I can't see why he thought it might explode.

annealing copper wire

I torched the first wire until it had a nice orange glow, let it cool until the orange faded, then used pliers to pick it up and drop it into a pot of water. Ralph scared me by immediately reaching in to the water with a bare hand and pulling out the wire. I didn't realize that the copper cooled so quickly.

quenching

The wire went into the water completely black, but as it cooled bits of the oxidation flaked off revealing pinkish red areas. The top wires have been quenched. The bottom ones are before annealing.

before & after annealing

Stefan and I both picked up one of the annealed wires and accidentally bent it. That's how soft it got. I had no idea the change was that great.

After annealing I hammered the wires flat on top and bottom with a planishing hammer and then used various texturing hammers to add interest to the bracelets. The ends of the wires were pounded flat into paddle shapes. The 8 gauge wire was formed into a serpentine shape before hammering. The serpentine shape was something I wanted to try. It isn't in the article. I had to anneal one of the thicker wires a second time to finish texturing it.

copper wire after hammering

hammering

The bracelets were then annealed again. After this I shaped them using an oval mandrel for the cuffs and a round mandrel for the bangles. I also used a file to clean up the ends a little and round off the paddle shapes. I was going for rustic rather than "fine".

After shaping I put them in a pickle made of vinegar and salt, rinsed, and brushed them with a brass brush.


I used some silver wire for a rivet on the bangles. This was the first time I had done rivets. I did not ball the end of the wire as the article instructed, mostly because I was tired of cleaning the scale off. I don't have a draw plate either, so I used pliers and a regular anvil. I just hammered around the end until I mushroomed it. I lashed one of the cuffs with silver wire. This was a real pain. I had trouble tucking the ends under. I then antiqued three of the bracelets using liver of sulfur. I really liked the way they looked after that. I put several coats of Renaissance Wax on the antiqued ones.

bangles and cuffs

I still have one more rivet to set. I'm going to put Art Clay on two of the remaining bracelets.



three bracelets after antiquing

Tuesday, August 11, 2009

New Texturing Hammers!

I got my hands on some patterned hammers recently and have started playing with them. Each hammer has two faces with different patterns. I bought one from Beaducation and the other at a show.

pattern hammers

pattern hammers 2

I textured some copper washers that I bought from Harbor Freight. The washers don't have a huge surface area and so don't show large area of pattern, but they are inexpensive to practice on.

ouch

Right away I whacked my finger. OUCH! I was bleeding. Maybe tomorrow I will have a patterned bruise. Just kidding--sort of.

textured copper washers

These were my favorite two patterns. The one on the left is made with the square faced pattern and the one on the right is made with the hammer face with the narrowest lines.

textured copper washers

I couldn't get a good picture of the other patterns. After my initial experiments I worked with the wide-striped hammer some more and got a much better looking pattern with it. The circle pattern hammer makes marks kind of like water and is pretty cool.

I could tell that if I hammered for extended periods of time this would aggravate my carpal tunnel. I get much less vibration in one hand if I use a tool to hold the washer in place. (Plus my fingers are out of range of the hammer.)

Most of these pieces will end up in earrings or bracelets. I textured both sides of the washers, although one side gets flattened a little when you textured the reverse.

Next on my list of metal work is stamping words on metal and etching copper.